Tag: Keyboard

Rename a Bluetooth Wireless Device on Apple

by Greg Johnson, posted in Tech Tips

New Bluetooth devices from Apple may initially have a broadcasted name of their MAC address. This is a uniquely identifiable serial number given to every Bluetooth device. Usually once a device is paired, it’s then given a generic name such as Keyboard.

Follow these instructions to rename a device:

  1. On your Apple computer, from the Apple Menu choose System Preferences > Bluetooth.
  2. With a keyboard for example, presuming it’s not Paired yet, it should be viewable in the list of available devices. Click on the Pair button and type the number displayed on the keyboard. It should then be Paired.
  3. Right click on the device and choose rename from the pop-up context sensitive menu.
  4. Rename and click the Rename button.
  5. To pair it with another device, right click on the item in the list and choose Remove. You’ll be told that to use it again you will need to Pair again. Confirm this message.
  6. If it’s a keyboard, the green light above the CD eject button will blink rapidly. If it doesn’t, push and hold the power button to turn the green light off.
  7. Then, press and hold the Power button as well as the Esc key for about 5 seconds and let go. The green light should begin to blink. This means the keyboard is ready to be paired with a new device. It will connect using the new name.

Note that when a device is paired to an iOS device, renaming isn’t an option. Only through the desktop computer can you rename it.

Considerations for iOS Devices

You may notice that a renamed device still shows up under the old name. Here are the conditions when this will happen and how to correct for it.

  1. On an iOS device, click the information link for a specific Bluetooth device, and click Forget This Device. Then follow the instructions above to rename the device.
  2. After you’ve renamed the device on a desktop Apple computer, your iOS device may still recognize it by the old name because the Bluetooth address (a MAC address serial number) is still the same.
  3. Pair the device.
  4. Use the ‘Forget This Device’ option to remove it.
  5. Pair it again.
  6. This time the new name should be showing up.

New Universal Mobile Keyboard works with Windows, iOS and Android mobile devices

by Greg Johnson, posted in Tech Tips, Technology Devices

(Source: Microsoft, 16 Sept. 2014)

[Purchase on Amazon]

Today’s tablets and smartphones are more powerful than ever, enabling people to be productive on the go. However, typing on the small, virtual on-screen-keyboard of a smartphone or tablet can be uncomfortable and inefficient.

It’s also common for people to carry multiple mobile devices and use the one that is best suited for the specific scenario they’re in — an iPad while in a coffee shop, a Samsung Galaxy S4 while sitting on an airplane, a Windows laptop in their hotel room.

With all these different devices, people frequently find they have a mixture of operating system platforms, resulting in them having to carry different accessories for each device. Microsoft’s new Universal Mobile Keyboard helps address that — it works with iPad, iPhone, Android devices and Windows tablets.

With the Microsoft Universal Mobile Keyboard, getting stuff done while you’re on the go has never been easier. Power through emails, put together a proposal, build a presentation, or simply instant message with a friend. The Universal Mobile Keyboard has an OS switch that lets you change from one operating system to another while maintaining a fully functional keyboard. And with the physical “chiclet” style keyset on this keyboard, you’ll feel like you’re typing on your laptop without lugging around the extra weight or bulk.

The Universal Mobile Keyboard was built with portability in mind. It’s easy and quick to set up, especially on the go. Simply open the protective cover and the keyboard automatically turns on, and connects using Bluetooth. Shut the cover, and it instantly turns off.

The cover has an integrated stand that can easily be detached, so you can position your tablet in the most comfortable position.

The Universal Mobile Keyboard will be generally available in October 2014 for the estimated retail price of $79.95 at the Microsoft Store and at various other retailers.

Suzanne Choney
Microsoft News Center Staff

20140922mo-Microsoft-Universal-Keyboard

__________

Note: This article was reposted here from the Microsoft website for broader distribution and for the purpose of promoting the product. No payment was received for posting this article.

Input Method Editors (IMEs) for Asian Script Language Input Fonts and Characters

by Greg Johnson, posted in How To, Tech Tips

Overview and Description

Because Windows 2000 and Windows XP allow the user to enter multiple languages using a variety of input methods, the system needs to know which in put method should be active for a particular language. These associations are called “installed language and method pairs,” or “input languages” (called “input locales” in Windows 2000). During installation, the default input language for the language version of the operating system, along with English, is installed for each user. The user can then define the list of input languages to be made available for his or her own account and usage. For example, on the same machine, one user can have an English keyboard layout and a Japanese IME installed, and another user can have both French and Arabic keyboard layouts installed. This customization is done by adding or removing input languages and using them on the fly from the Regional And Language Options property sheet, provided that the language support of the target language has already been installed.

Figure 1: Each user can add and remove input languages from the Languages tab of the Regional And Language Options property sheet.

Figure 1: Each user can add and remove input languages from the Languages tab of the Regional And Language Options property sheet.

The default input language is the input language that is active when a new application thread is started. Switching to a different input language is done on a per-thread basis; you can have two different input languages in two different applications. The taskbar indicates which input language is currently active. For example, in Figure 5-2, English is the input language that is currently active. When the user clicks the language indicator in the taskbar-each language is represented by its two-letter abbreviation-Windows 2000 and Windows XP present a list of alternatives such as Japanese, French (Canada), and so on.

Figure 2: List of available input languages, with English being the one that is currently active for this particular user.

Figure 2: List of available input languages, with English being the one that is currently active for this particular user.

The shortcut keys iterate through the list of installed language and method pairs in the order in which they were added via the Regional And Language Options property sheet. If the user has selected Left Alt+Shift in the Advanced Key Settings dialog box, Left Alt+Shift will allow the user to toggle between different installed input languages.

Figure 3: Switching between various input languages in Windows XP.

Figure 3: Switching between various input languages in Windows XP.

Having gained an understanding of how the user can customize a list of input languages and switch from one input language to another, you’ll now see the most efficient ways to work with input languages from a developer’s standpoint. Taking advantage of system support will go a long way toward making your job easier.

Input Method Editors

IMEs are components that allow the user to enter the thousands of different characters used in East Asian languages using a standard 101-key keyboard. The user composes each character in one of several ways: by radical, by phonetic representation, or by typing in the character’s numeric code-page index. IMEs are widely available; Windows 2000 and Windows XP ship with standard IMEs that are based on the most popular input methods used in each target country, and a number of third-party vendors sell IME packages.

An IME consists of an engine that converts keystrokes into phonetic and ideographic characters, plus a dictionary of commonly used ideographic words. As the user enters keystrokes, the IME engine attempts to guess which ideographic character or characters the keystrokes should be converted into. Because many ideographs have identical pronunciation, the IME engine’s first guess isn’t always correct. When the suggestion is incorrect, the user can choose from a list of homophones; for more advanced IMEs, the homophone that the user selects then becomes the IME engine’s first guess the next time around. This process is summarized in Figure below:

Figure 4: The process through which an IME engine converts keystrokes into ideographic characters.

Figure 4: The process through which an IME engine converts keystrokes into ideographic characters.

 

East Asian Writing Systems

Chinese, Japanese, and Korean writing systems all offer some interesting complexities not found in Latin writing systems. To put things in clearer context, it will be useful for you to have an idea of what these complexities entail.

Chinese: Three forms of ideographic characters are commonly used today in the world: Traditional Chinese, Simplified Chinese, and kanji (which is used for Japanese). Traditional Chinese characters, which are thousands of years old and have kept their original shapes, generally contain more strokes than other ideographic forms, and are more pictorial. These characters are typically used in Taiwan. Simplified Chinese characters, which are based on Traditional Chinese characters, were developed in mainland China to make reading and writing easier to learn. Although Traditional Chinese and Simplified Chinese share some characters, the simplified characters, of which there are less than 7,000, are composed of fewer strokes and in most cases are distinct from their original counterparts. This is why software products developed for the Chinese-speaking market are usually released in two editions-one for the Traditional Chinese script and one for the Simplified Chinese script.

Japanese: Japanese characters are called “kanji.” Japanese mixes kanji characters with characters from two syllabaries, collectively called “kana.” The two forms of kana are referred to as “hiragana” and “katakana.” Hiragana is a cursive script, commonly used in Japanese text to represent ending inflections for verbs and to write native Japanese words that have no kanji equivalent, such as “and,” “of,” and “to.” Katakana is chiefly used to represent words borrowed from other languages. All kana symbols, except for single-vowel characters and the character “n,” represent a consonant followed by one of five vowels. Hiragana and katakana both represent the entire Japanese script of sounds.

Korean: The Korean written language uses two types of characters: hangul and hanja. A hangul character is a single syllabic character created by combining one or more consonant signs and a vowel sign. There are 24 basic elements (14 consonants and 10 vowels), or phonemes, used to denote these signs; these elements are called “jamos.” You can create up to 51 jamos by combining two or more basic elements to form additional vowels or consonants, called “compounds.” Compounds and basic elements together comprise 21 vowels (10 basic vowels and 11 compound vowels) and 30 consonants (14 basic consonants and 16 compound consonants). A hangul character (syllabic) consists of an initial consonant, a medial vowel, and sometimes a final consonant. Nineteen of the 30 consonants can be initial consonants. All 21 vowels can be medial vowels, and 27 of the 30 consonants can be final consonants. This means that 11,172 hangul character combinations are possible, though far fewer are actually used. The Korean language also adopted hanja characters from Chinese and uses them for more formal written communication and to represent personal names. Most daily communication is written in hangul.

Ways to Enter Ideographs with an IME

With an IME you don’t have to use a localized keyboard to enter ideographic characters. While East Asian keyboards can generate phonetic syllables (such as kana or hangul) directly, the user can represent phonetic syllables using Latin characters. In Japanese, Latin characters that represent kana are called “romaji.” Japanese keyboards contain extra keys that allow the user to toggle between entering romaji and entering kana. If you are using a non-Japanese keyboard, you need to type in romaji to generate kana.

The best way to learn how an IME works from the user’s perspective is to try using it and to take advantage of the extensive Windows Help files. As a reference, the following sections look at how the Japanese IME that ships with Windows XP works.

The Standard Japanese IME for Windows XP

The Japanese IME for Windows XP, called “Microsoft IME 2002” (see Figure 5), has six standard input modes, listed in Table below. Additionally, IME 2002 contains an IME Pad that allows for alternative methods of input, and several other tools for handling both conversion into kanji and voice input. Although you will usually see IME 2002 the way it appears in Figure 5-8, it also has a drop-down menu that lists various input modes.

Figure 5: The Japanese IME Language bar.

Figure 5: The Japanese IME Language bar.

 

Table 1: The Japanese IME input modes

Table 1: The Japanese IME input modes

 

Figure 6: IME 2002 on Windows XP. The input modes are listed in the drop-down menu. The last input mode, called "direct input," turns off the IME, and keystrokes are sent to the application directly without being converted into phonetic syllables.

Figure 6: IME 2002 on Windows XP. The input modes are listed in the drop-down menu. The last input mode, called “direct input,” turns off the IME, and keystrokes are sent to the application directly without being converted into phonetic syllables.

 

Input of Japanese Characters

In order to begin entering Japanese characters in an application running on Windows XP, you need to activate the IME by selecting it from the list of input languages. When you activate the IME, the floating Language bar changes to the Japanese IME toolbar as you saw earlier. The table below shows what happens when you enter Japanese characters into an application running on Windows XP.

Table 2: How the Japanese IME works

Table 2: How the Japanese IME works

You can form a number of kanji characters before pressing Enter. The IME engine will attempt to convert your keystrokes into a “determined string” based on Japanese grammar rules. There are four different conversion modes that allow you some control as to where the IME gets its data to convert. (See Table 3 below.)

Table 3: Japanese IME conversion modes

Table 3: Japanese IME conversion modes

 

Top of pageTop of page

Techniques for Handling Input Languages in Win32

The Microsoft Developer Network (MSDN) documentation (found athttp://msdn2.microsoft.com) and programming APIs represent input languages with a variable type called “input locale identifier,” formally known in older documentation as “Handle to the Keyboard Layout” (HKL) and still used as the type identifier. HKL is an archaic name from a time when the only input was from a keyboard. The input locale identifier name is a 32-bit value composed of the hexadecimal value of the language identifier (low WORD) and a device identifier (high WORD). (See Figure 7 below.) For example, U.S. English has a language identifier of 0x0409, so the primary U.S. English layout is named “00000409.” Variants of the U.S. English layout (such as the Dvorak layout) are named “00010409,” “00020409,” and so on. The device identifier is not limited to keyboards and IMEs; data can now be entered by more sophisticated mechanisms such as voice- and text- recognition engines. For instance, Microsoft Windows Text Services Framework (TSF) – a system service available on Windows XP-enables advanced, source-independent text input. (For more information on TSF, see Text Services Framework).

Figure 7: The HKL variable, which represents input languages.

Figure 7: The HKL variable, which represents input languages.

The easiest way to handle input languages is to use the standard controls that the operating system provides whenever you are expecting user input. For example, by using Unicode edit controls or rich edit controls, you enable your application to handle multilingual text input. The operating system automatically handles input languages in a way that is transparent to your application. Text APIs uses a standard multiline edit control, which eliminates the hassle of dealing with input languages.

Advanced applications (such as a text editor) that need to have full control over how input languages are handled should monitor-and should be able to respond to-the user’s changes. When a user selects an input language by clicking on the language indicator of the taskbar or by pressing Left Alt+Shift, the input language is not automatically changed-either action generates a request that the active application must accept or reject. In response to the hot-key combination or the mouse click on the language indicator of the taskbar, the system sends a WM_INPUTLANGCHANGEREQUEST message to the window of focus, as figure below illustrates. If the application accepts the message and passes it to DefWindowProc, the system initiates switching the input language, sending a WM_INPUTLANGCHANGE message. The process is slightly different when the input method is a part of the Text Services Framework (TSF), in which case only a WM_INPUTLANGCHANGE is sent. When the system successfully completes the change, it generates a WM_INPUTLANGCHANGE message. The lParam variable of the WM_INPUTLANGCHANGE message contains the input locale identifier (that is, the HKL) of the new input language.

Figure 8: WM_INPUTLANGCHANGEREQUEST and WM_INPUTLANGCHANGE message propagation flowchart.

Figure 8: WM_INPUTLANGCHANGEREQUEST and WM_INPUTLANGCHANGE message propagation flowchart.

An application that does not support multiple languages will reject the WM_INPUTLANGCHANGEREQUEST message. It might reject any or all WM_INPUTLANGCHANGEREQUEST messages, or it might perform a couple of tests first. For example, the wParam variable of this message is a Boolean value-bLangInSystemCharset -that indicates whether the requested input language can be represented in the current system locale. Representing input languages is not a worry when dealing with Unicode applications, but non-Unicode applications should, in fact, monitor this value, or they will display the wrong characters.

Similar to the system generating a WM_INPUTLANGCHANGEREQUEST message in response to a user request, applications can also initiate input language changes by calling the ActivateKeyboardLayout API. This allows a user who is editing a document containing Latin and Greek text to automatically activate the Greek input method when moving the insertion point from the Latin text to the Greek text. (See Table 4 below.) Likewise, when this user moves the insertion point back to the Latin text, the application will activate the default Latin-based input method.

Figure 9: When the cursor is positioned in a Greek text stream, the active keyboard layout should switch to Greek.

Figure 9: When the cursor is positioned in a Greek text stream, the active keyboard layout should switch to Greek.

 

Other Win32 APIs that handle input methods are shown in Table 4 below:

Table 4

Table 4

When you design functionality to allow the user to switch keyboard layouts, keep in mind that because the letters on keyboards vary from layout to layout, the keys used to generate shortcut-key combinations might also vary. For example, the French keyboard defaults to the AZERTY layout, whereas the English layout follows a QWERTY mapping. Therefore, it is suggested that you use numbers and function keys (F4, F5, and so on) instead of letters in shortcut-key combinations.

In addition to enabling your application to handle varying input languages, you will also need to enable it to support IMEs. (Keep in mind that if you use standard APIs for input, your applications will automatically handle IMEs.) By enabling IME support, you allow the user to enter ideographs, for example, from various East Asian writing systems. The following sections explore what an IME does-with practical examples and technical solutions on the best ways to support IMEs.

How the IME System Works

The IME module in Windows 2000 and Windows XP fits into a larger mechanism for passing user input to applications and, like other input methods, the easiest and safest way of handling input is by using standard system controls such as edit fields and rich edit controls. Unless you are writing an IME package or customizing your IME user interface (UI), all of the IME complexities are taken care of for you if you use standard input APIs.

Whether an input language uses an IME or a keyboard to enter a language is something that is entirely transparent to the user. The procedure is the same whether the user is switching IMEs or Western keyboard layouts. Both actions are accomplished by clicking the language indicator on the taskbar or by entering a shortcut-key combination. Furthermore, it does not matter to an application which input method is used because switching IMEs generates the same messages as switching keyboard layouts: WM_INPUTLANGCHANGEREQUEST (if the IME is not part of TSF) and WM_INPUTLANGCHANGE. Applications can activate specific IMEs by callingActivateKeyboardLayout. The IMM manages communication between IMEs and applications, serving as the go-between. When the user is typing with the IME, each keystroke posts a WM_IME_COMPOSITION message with the GCS_COMPSTR flag to indicate that there is an update to the composition string. The message’s WPARAM value returns the first character of the string, and the rest can be retrieved via the ImmGetCompositionString API with the same GCS_COMPSTR flag. Then when the user presses Enter or clicks a character to place it in a document, the IME, by default, posts a WM_IME_COMPOSITION message with the GCS_RESULTSTR flag. (You can retrieve the committed string with the same API and the GCS_RESULTSTR flag.) If the latter WM_IME_COMPOSITION message is sent to DefWindowProc, then for each character in the committed string it posts a WM_IME_CHAR message containing the actual character. For a non-Unicode window, if the WM_IME_CHAR message includes a double-byte character and the application passes this message to DefWindowProc, the IME converts this message into two WM_CHAR messages, each containing one byte of the double-byte character. If the application ignores either message, it falls through to the application’s DefWindowProc, which in turn notifies the IMM that the message has been ignored. The IME then resends the character or string byte-by-byte via multiple WM_CHAR messages. For Unicode windows, WM_IME_CHAR and WM_CHAR are identical.

Discussed in the following sections are the three discrete levels of IME support for applications running on Windows: no support, partial support, and fully customized support. Applications can customize IME support in small ways-by repositioning windows, for example-or they can completely change the look of the IME UI.

No IME Support: IME-unaware applications basically ignore all IME- specific Windows messages. Most applications that target single-byte languages are IME-unaware.

Applications that are IME-unaware inherit the default UI of the active IME through a predefined global class, appropriately called “IME.” This global class has the same characteristics as any other Windows-based common control. For each thread, Windows 2000 and Windows XP automatically create a window based on the IME Global class; all IME-unaware windows of the thread share this default IME window. When IME-unaware applications pass IME-related messages to the DefWindowProc function, DefWindowProc sends them to the default IME window.

Partial IME Support: IME-aware applications can create their own IME windows. Applications with partial IME support can use this application IME window to control certain IME behavior. For example, by calling the function ImmIsUIMessage, an application can pass messages related to the IME’s UI to the application IME window, where the application can process them. The following code (with proper error handling and possibly more messages handled) would appear in the window procedure of the application’s IME window:

HIMC hIMC;
LPVOID lpBufResult;
COMPOSITIONFORM cf;
DWORD dwBufLen;
if (ImmIsUIMessage(hIMEWnd, uMsg, wParam, lParam) == TRUE)
{
switch(uMsg)
{
case WM_IME_COMPOSITION:
if (lParam & GCS_RESULTSTR
{
hIMC = ImmGetContext(hWnd);
dwBufLen = ImmGetCompositionString(hIMC,
GCS_RESULTSTR, NULL, NULL) +
sizeof(TCHAR);

 

lpBufResult =? malloc(dwBufLen);

 

if(ImmGetCompositionString(hIMC, GCS_RESULTSTR, lpBufResult, dwBufLen) > 0)
{
// …
// process the text in lpBufResult
// …
}
else // a negative error value was returned
{
// …
// handle an error
// …
}
free(lpBufResult);
ImmReleaseContext(hWnd, hIMC);
}
break;
}
}
return 0;
}

The same window procedure could call SendMessage either to reposition the status, composition, or candidate windows, or to open or close the status window.

SendMessage(hIMEWnd, WM_IME_CONTROL, 
IMC_SETCOMPOSITIONWINDOW, "cf);

Other API functions that allow the application to change window positions or properties areImmSetCandidateWindow, ImmSetCompositionFont, ImmSet-CompositionString,ImmSetCompositionWindow, and ImmSetStatusWindowPos. Applications that contain partial support for IMEs can use these functions to set the style and the position of the IME UI windows, but the IME dynamic-link library (DLL) is still responsible for drawing these windows-the general appearance of the IME’s UI remains unchanged.

Full IME Support In contrast, applications that are fully IME-aware take over responsibility for painting the IME windows (the status, composition, and candidate windows) from the IME DLL. Such applications can fully customize the appearance of these windows, including determining their screen position and selecting which fonts and font styles are used to display characters in them. This is especially convenient and effective for word processing and similar programs whose primary function is text manipulation and which, therefore, benefit from smooth interaction with IMEs, creating a “natural” interface with the user. The IME DLL still determines which characters are displayed in IME composition and candidate windows, and it handles algorithms for guessing characters and looking them up in the IME dictionary. FULLIME, which is an example of a customized IME UI, can be found in the Microsoft Windows Platform SDK, available at http://msdn2.microsoft.com.

Applications that are fully IME-aware trap IME-related messages in the following manner:

  1. They call GetMessage to retrieve intermediate IME messages.
  2. They process these messages in the application WindowProc.
  3. They call TranslateMessage (part of the IMM) to pass the messages to the IME DLL. The IME needs to remain synchronized in the same way that keyboard drivers need to remain synchronized with dead keys. Remember that partial IME support is taken care of for you if you use standard input calls like those to Rich Edit.

You’ve made sure your application can handle different input languages and methods. Another task in ensuring your application can support multilingual input, output, and display is to meet the inherent demands that complex scripts present. In the sections that follow, you will see various linguistic traits that are associated with complex scripts, and you will learn about Windows support for working with complex scripts.

__________

The above document is taken from the Microsoft Developer Network website here:
http://msdn.microsoft.com/en-us/goglobal/bb688135.aspx

It was posted here for archival purposes, and also to ensure that the document is easy to find when searched for.