News Feed

Mediacom Outage Map

The map below shows Mediacom outages by region. Here we have zoomed into Iowa as of 13 October 2014 @ 10:22 PM.

20141013mo2222-outage-map-mediacom

“At the time of this posting, our Internet has been out for three days. Upon requesting service, we were told there is higher than average call volume and all available technicians are booked until the end of the week. Yet, they claim there are no known outages in our area.” 13 October 2014 @ 10:22 PM.

__________

Note: The map data represents complaints received on the DownDetector.com website. Broadband customers submit reports of outages in their area, and those submitted complaints are represented on the map by provider. It’s not entirely scientific, and some outage reports could be a result of user error. However, the map does provide a helpful guide.

Setup Microsoft Windows 8 With Local Account

Summary

It’s helpful to have a local user account on your Windows 8 computer in case something happens to your Microsoft online account. The instructions on this page are applicable for Windows 8.1 and Windows 10.

Benefits of a Local Account

Sometimes we forget our password, or an online account gets hacked into. Usually there are online steps we can follow to try and recover our password or account.

However, with Microsoft Windows, if you are logging into the computer with your Microsoft online account username and password, and the account is compromised you won’t be able to get into your computer. You’ll be locked out of all your files and programs, and you won’t be able to get online to fix the problem.

With a local user account, the login will always work regardless of what’s going on with your online account. Having an extra administrative user account on the computer (as a back door) will let you gain access to the computer if another user account on the computer becomes infected with malware or for some other reason won’t permit a login. So, for this reason it’s important to have a local user account.

Instructions

During the Windows 8 setup process, you’ll be presented with a screen like the one below that asks you to “Sign in to your Microsoft account.” Click the image below to enlarge.

20141011sa-microsoft-windows-setup-local-user-account-01

If you want to use a local user account instead, it won’t be clear what you should do at this point. Click the link that says, “Create a new account.” Even though you don’t want a new account, this takes you to a screen (example below) where you can choose to setup a local account. Click the image below to enlarge.

20141011sa-microsoft-windows-setup-local-user-account-02

Click the link that says “Sign in without a Microsoft account.” Elsewhere this link may be accompanied by a warning that states “Not Recommended.”

You’ll be taken to a screen (shown below) where you can setup a local account. Click the image to enlarge.

20141011sa-microsoft-windows-setup-local-user-account-03

Provide a username, password, and password hint.

Why So Difficult?

At this point, you might be wondering why Microsoft makes it difficult to setup a local user account. The reason is because they would like to get as many people as possible setting up online Microsoft user accounts.

Having a local user account on a computer synchronized with the Microsoft cloud services can be very valuable in terms of accumulating information about each person and computer. This big data has aggregate value — either to advertisers, or to Microsoft for their own research and system development.

 

NETGEAR ReadyNAS

Summary

The NETGEAR ReadyNAS is a data storage system for home or business that allows secure local and remote access to files. [Buy]

Product Description

Perfect for all your data including large photo and movie collections, ReadyNAS makes it easy to backup all your valuable content in one secure location where you can then stream it, share it, and access it from anywhere. Not only does ReadyNAS automatically store previous versions of files with hourly backups, it is also fully compatible with the Apple Time Machine for remote or local file backup and recovery from Mac computers. Your files are safe and sound with NETGEAR ReadyNAS.

Features

  • Safe and easy backup for all your computers and mobile devices
  • Stream movies and music with DLNA, iTunes, & PLEX
  • Enjoy and share content from all your devices, anywhere with free mobile apps
  • Automatic RAID protection against disk failure
  • Exclusive snapshot technology for recovering past versions of a file
  • 1.2GHz processor and 512MB on-board memory
  • 4-bays for 16TB maximum capacity
  • Easy drive install plus hot swap

Benefits

  • Stream all your videos—Stream your movies, music and photos to DLNA-enabled smart TVs and game consoles
  • Access your files from anywhere—Wherever you are, your data is there with you. Use the ReadyCLOUD mobile app or web portal for access from any device
  • Share it all—Easily share files with friends, family and co-workers
  • Stay in sync—Keep everything up to date with the ReadyDROP sync folder
  • Store recorded surveillance footage—View, manage, and store recorded video from up to 16 IP cameras per ReadyNAS (premium feature)

Capabilities

  • Stream all your videos—Stream your movies, music and photos to DLNA-enabled smart TVs and game consoles
  • Access your files from anywhere—Wherever you are, your data is there with you. Use the ReadyCLOUD mobile app or web portal for access from any device
  • Share it all—Easily share files with friends, family and co-workers
  • Stay in sync—Keep everything up to date with the ReadyDROP sync folder
  • Store recorded surveillance footage—View, manage, and store recorded video from up to 16 IP cameras per ReadyNAS (premium feature)

Data Protection

  • Back it up—Securely back up files from your PC and Mac computer. Automatically back up your mobile photos
  • Disk failure protection—RAID 0, RAID 1, RAID 5, RAID 6, RAID 10 and XRAID disk failure protection
  • Virus protection—Real-time virus protection
  • File restoration—Hourly snapshots of your files for point-in-time recovery

Product Image Gallery

3D Printing, Scanning, and Design Resources

Summary

This page offers information about 3D printing, scanning, and design. This page will be updated over time.

3D Printer Websites

Printers

MakerBot 3D Printing Discussion

MakerBot Replicator

DeeGreen 3D Printer

3D Printing at the University of Iowa

UP! Plust 3D Printer Demo

HP Pavilion Laptop Computer Boot Order USB

Summary

The following instructions will be helpful if you’re trying to startup your HP Pavilion laptop computer to USB.

Configure for USB Startup

Follow these instructions to configure for USB startup:

  1. Startup the computer.
  2. As soon as the computer is starting up, while the screen is still black, quickly press F10 repeatedly to enter the BIOS settings menu (this may be F2 or F6 on some computers).
  3. Select the Advanced tab.
  4. Arrow down to highlight Boot Order and press Enter.
  5. Use the F5 and F6 keys to move items up and down. Place the USB item at the top.

What is the boot order?

When the computer starts, the system BIOS begins to check a pre-determined list of drives and devices that may contain an operating system such as Windows. The computer can boot an operating system from a hard drive, floppy drive, CD or DVD optical drive, USB storage device, or a network. The order in which the devices are checked is configurable through the BIOS setup menu.

What is the default boot order?

The default boot order settings for the computer are configured in the factory. The default boot order for HP notebook PCs is listed below.
  1. Floppy disk drive
  2. Optical drive (DVD, CD-ROM)
  3. Hard drive
  4. USB device
  5. Network adapter

Reset the boot order to the default settings

To reset the boot order to the default settings, follow the steps below.
  1. Turn on or restart the computer.
  2. While the display is blank, press the f10 key to enter the BIOS settings menu.
  3. Press the f9 key to reset the BIOS to the default settings.
  4. Press the f10 key to save the changes and exit the BIOS settings menu.

__________

Some of the above information was from an HP support page.

Apple Mac Computer Search for All Files of a Certain Kind

Let’s say you’re looking for a spreadsheet on your Apple computer. You may know the filename, but unfortunately the file name is a word or two that are very common and will show up in many different files.

You can search your computer for all spreadsheets by using Spotlight and typing kind:numbers (for example) to see a list of all Apple Numbers files on your computer. Below is a handy chart with some examples (click it to enlarge). To learn more, read “Create good queries in Spotlight.”

20141009th-apple-mac-computer-spotlight-search-files-type-kind

When Windows Updates Crash Your Computer

Problem Summary

Let’s say you recently restored your Windows 8 computer to ‘like new’ condition using the recovery feature that most computers have.

You’ll need to install all of the updates that were released since the computer was new. That could be over 100 updates.

During this process, if you select all of the updates and install them at one time, it may cause some conflict that will result in the computer not starting properly.

Then you’ll get a message stating the computer is reverting to a previous state, and urging you not to turn off the computer. Yet, it never completes this process.

Solution

In general, whenever you see a long list of Windows Updates that need to be installed, it’s a good idea to install them a few at a time.

The updates are numbered with a corresponding KB… number. You can start by installing a few or a dozen of the lower numbered updates. This could be helpful since later updates will likely assume the earlier ones (possibly pre-requisites) have already been installed.

Installing the same batch of updates a few at a time could mean the difference between a working computer or a non-working computer.

Apple Connect to Server Error: The share does not exist on the server.

Introduction

On Apple computers, there’s an option to Connect to Server. This is found in the Go menu of the Apple Finder (file browser). You can also get to this by pressing the Command+K keys. Normally, you would type in a server address, or use a previously saved address to access your files. Sometimes a person will send you a server address to copy and paste into the Server Address box.

Copy and Paste Problem

If in the process of copying and pasting, you mistakenly get additional text, perhaps a line or two of text below the server address, and copy that into the Server Address box, the additional lines won’t be visible.

If you save this pasted address, and it shows up under Favorite Servers, it still will not show that you’ve actually pasted in several lines of text.

Problem Connecting to the Server

Every time you attempt to Connect to this server address, you will get the following error box:

20141008we-error-there-was-a-problem-connecting-to-the-server-the-share-does-not-exist-on-the-server

Diagnosing the Problem

To discover whether or not this has happened to you (additional text was pasted in), open your Connect to Server dialog box as shown below. The Server Address example displayed below actually has two lines of text. There’s a second hidden line of text.

Place your cursor at the end of the typed server address, and press the right arrow key or down arrow key. This will scroll down to additional lines. Alternatively, you can select all (Command+A) and then copy (Command+C) and past (Command+V) into a TextEdit or a Word Processing program to see what’s been previously pasted into the Server Address field.

20141008we-apple-connect-to-server

When attempting to clean up this problem, be sure to select all text in the Server Address field and press delete. Also click / select any saved addresses that don’t work and remove them.

MSI Z87I AC Motherboard Essential Guide

Summary

The MSI Z87I AC motherboard has several advantages: it’s small, has plenty of I/O ports, has two Ethernet ports, has integrated video, and comes with powerful wireless capabilities (the AC model includes 802.11ac wireless rather than 802.11n in the Z87I). The information and suggestions on this page are specific to the Z87I AC, but would generally apply to other motherboards.

BIOS Problems

As of October 2014, the motherboards are shipping with version 1.5 of the BIOS that was originally released on 7 January 2014. This is several revisions out of date and has various problems associated with it that are described on this page. The most recent version of the BIOS at this point is version 1.8 released on 18 July 2014. For the most current BIOS, visit the MSI BIOS download page for the MSI Z87I AC.

BIOS Update Instructions

For the reasons described further down on this page, it is essential to update your BIOS. To update your BIOS, follow these instructions.

  1. Visit the MSI BIOS download page for the MSI Z87I AC.
  2. Download the most recent BIOS.
  3. Double-click the file to expand/open it and find the BIOS file. It should have a name like E7851IMS.180 (for version 1.8).
  4. Put that file on a USB flash drive.
  5. Startup your computer and press DEL to enter the BIOS settings mode.
  6. Click on the M-FLASH menu option to view the BIOS flash update menu.
  7. Click on “Select one file to update BIOS and ME.”
  8. Choose your USB flash drive from the list.
  9. Select the file from the list.
  10. Follow the remaining on-screen instructions and watch the computer closely to ensure the process goes smoothly. The computer may automatically restart once the BIOS update is complete.

MSI Z87I AC Restart Problems

With BIOS version 1.5 the computer will shut down properly. However, if you choose the Restart option from within your operating system, or from within the BIOS, it won’t restart. It will just go to a blank screen and not do anything further. This problem is solved by upgrading the BIOS from 1.5 to 1.8.

Won’t Wake on Keyboard Input

Once the computer goes into sleep mode, it won’t wake with keyboard input or mouse activity. This is actually a default setting and can be changed in the BIOS settings. Follow these instructions:

  1. Startup your computer and press DEL to enter the BIOS settings mode.
  2. From the Settings menu, choose Advanced.
  3. Choose Wake Up Event Setup.
  4. Resume from S3 by USB Device is set to Disabled by default. Click this and choose Enabled.
  5. Click the ‘X’ in the upper right corner to Exit the BIOS settings and be given an option to save configuration and restart.

BIOS Clock System Time is Incorrect

You may notice that the BIOS System time appears to be incorrect, and no matter how many times you attempt to reset it, the time is incorrect again. For example, if you’re on Central Daylight Time, you the system time may be five hours ahead. This is actually not an error. Central Daylight Time is UTC -5 hours and the system time is set to display UTC (Universal Time Coordinated or Coordinated Universal Time). So, the time is always automatically setting itself to UTC.

Optimal BIOS Settings

Here are a few settings you may want to set or confirm:

  • Settings > Advanced > Intel Rapid Start Technology. This should be enabled for the fastest startup times.
  • Settings > Advanced > Power Management Setup > Restore after AC Power Loss. Click this and choose Last State or Power On if this is a computer that should be always on. If the power is interrupted, the computer will restart automatically when the power is restored.
  • Settings > Advanced > Windows 8/8.1 Features. This should be enabled if you are running Windows. Otherwise, leave it disabled (if you’re using Linux, for example).
  • Settings > Advanced > Wake Up Event Setup > Resume from S3 by USB Device. You will probably want the ability to wake the computer (or turn the display on from sleep mode) by using the keyboard or a mouse click. This feature is off by default. Click and choose Enabled.

You can learn more by visiting the MSI Z87I AC webpage.

Features

  • Supports 4th Gen Intel® Core™/Pentium®/Celeron® processors for LGA 1150 socket
  • Supports DDR3-3000(OC) Memory
  • USB 3.0 + SATA 6Gb/s
  • Military Class 4: Top Quality & Stability
  • Military Class Essentials: Total Protection for Military Class Motherboards
  • OC Genie 4: Overclock in 1 Second
  • Click BIOS 4: Easily Fine-tune Your System
  • 4K UHD Support: Ultra-high Definition Visual Experience
  • 3 Digital Display Outputs: DisplayPort/HDMI/DVI Support
  • PCI Express Gen 3: World’s 1st PCI Express Gen 3 Motherboard Brand
  • USB Audio Power: A Break Through in USB Audio Quality
  • Command Center: Control & Customize Your PC Settings
  • Fast Boot: Quickly Boot Up & Enter OS in A Few Seconds
  • Wi-Fi 802.11ac, Bluetooth 4.0, Intel® Wireless Display

Photos

Below are photos of the MSI Z87I AC motherboard.

Ubuntu Software Center Search Box Missing

The Ubuntu Software Center normally has a search box in the upper right corner. However, if the window is sized slightly smaller than usual, that search box goes away. This is an error in how the responsive design of the interface was setup.

You can see examples below. The top example is of the window when it’s not sized large enough. The bottom example shows a slightly wider view. Click either image for a larger view.

A better method would be to resize the icons or have a ‘more’ indicator button to expand out and see other options.

20141007tu-ubuntu-software-center-search-missing 20141007tu-ubuntu-software-center-search-visible